Programming the Delta System
41
Delta Series Audio Controllers
To label a room, select “Room Label” and which of the rooms you want to label. Since the screen
defaults to “Exit”, use the navigation buttons to navigate the rooms on the menu and when you want to
select one to label, press the center navigation button. The first letter will begin flashing.
In the example shown in FIG. 39, the label for Zone #1 is being selected for labeling. Since there are
only 6 characters allowed for the label, you can abbreviate or use creative acronyms that make it easy for
you or other users to recognize.
Select the character you want by pressing the center button of the navigation array and the next character
position will fl ash. Repeat this process until the zone is labeled.
Once labeling is complete (after the last character is completed or passed), the navigation brackets will
allow movement to a different room selection for labeling.
FIG. 38 Labeling a Room
FIG. 39 Select a Room to Label