Programming the Delta System
44 Delta Series Audio Controllers
Tuner Sub Menu
From the Setup screen, select Tuner (FIG. 42). If there are no tuner modules installed in the Delta
Controller, the Tuner selection will simply not appear.
You can select the band (AM/FM) - The AM/FM selection works like a toggle.
Select AM and press Nav. Centre, it will change to FM.
Press Nav. Centre again, and it changes back to AM.
You can select Stereo/Mono - The Stereo/Mono selection works like a toggle.
Select Mono and press Nav. Centre, it will change to Stereo.
Press Nav. Centre again, and it changes back to Mono.
Setting a Station Preset
1. Press UP or DOWN to seek to desired station.
2. Once station is found, select Preset.
The Delta programming screen will be displayed showing presets 1-5 and a Next Page selection.
There are two screens (the Next Page selection takes you to presets 6-10 and offers a Previous Page
command).
3. Select the preset number you want and press Nav. Centre. The station selected will be saved to that
preset location along with the band (AM/FM) and Stereo or Mono setting.
After saving a preset, the Tuner Preset screen remains displayed with the current preset as the
selected item.
FIG. 42 Tuner Sub Menu
AM and FM, Stereo or Mono all
work like a toggle command.