Using Matrix Keypads
54 Delta Series Audio Controllers
Direct Numeric Access - CD Player or Changer
When selecting direct numeric access for a single disc CD player, the format is ONLY to choose the
track (since there is only a single disc from which to choose). When selecting just a track the Delta
Controller will recognize a selection of up to 3 characters (1-999). When the source component is a
multi-disc changer however, there is the option to select either the track on the current disc OR directly
select the disc and track number you want to play. The Delta Controller recognizes up to 3 characters for
a disc command (separated by the • (dot) command) and then 3 additional characters for the track
command. If there is no dot in the command string, Delta assumes it’s just a track only entry.
To select a specific Track on the disc currently playing, press TTT + ENTER (TTT=Track) - FIG. 58.
To select a specific Disc & Track, the format is DDD•TTT + ENTER (DDD=Disc & TTT=Track) -
FIG. 59.
Please note that if you want to go to a disc in a multi disc changer, but you want it to begin playing from
the beginning (in other words you don’t plan to enter a specific song) you must either tell Delta to just
start playing the disc (such as 4 + • + ENTER) or tell it to start on track number 1 (4 + • + 1 + ENTER).
Without entering the “dot” after the disc number, Delta assumes the command is a track number. All disc
numbers MUST be followed by the “dot” command.
Direct Numeric Access - Satellite Radio or DSS/DBS Tuner
Using the Numeric keypad, enter the station number and press ENTER. Strings of 2 to 4 numbers are
recognized (FIG. 60).
1. First enter the satellite channel (up to 4 digits)
2. Press ENTER to execute the command.
FIG. 58 Select A Specific Track On The Disc Currently Playing
Remember that direct TRACK ONLY selection will select from the disc that is
currently in play.
FIG. 59 Select A Specific Disc & Track