Using the Script Menu MT8850A / MT8852A Bluetooth Test Set
Single Slot Sensitivity Test (Single Payload Mode) For a single slot sensitivity measurement the MT8850A/MT8852A transmits a DH1 packet
with a pseudo random payload (PRBS 9) to the EUT at a minimum power level. This test
can be performed with hopping on or off.
1. Refer to the settings below to enable the single slot sensitivity test in the test list.
Test control: Loopback
Payload: PRBS9
Packet type: DH1
Hopping mode: On or Off
2. Choose “Single sensitivity” from the Script menu.
3. Press the key to select or deselect this test from the script routine.
4. If a test is selected, the box will be filled in. If not selected the box will be hollow.
5. Press the
[Setup] soft key.
6. The Single sensitivity test limits screen is displayed.
7. Press the
[Defaults] soft key to restore the default values.
8. Choose the limit you want to change.
9. Press the key and enter the new limit using the keypad.
10. Press the
[Enter] soft key.
11. Press the key to return to the Script menu.
13000-000109 8-37
June 2003 Testing in Single Payload Script Mode