For Safety
Always refer to the operation manual when working near
locations at which the alert mark, shown on the left, is
attached. If operation is performed without heeding the
advice in the operation manual, there is a risk of personal
injury. In addition, the equipment performance may be
reduced.
Moreover, this alert mark is sometimes used with other
marks and descriptions indicating other dangers.
or
When supplying AC power to this equipment, connect the
accessory 3-pin power cord to a 3-pin grounded power
outlet. If a grounded 3-pin outlet is not available, use a
conversion adapter and ground the green wire, or connect
the frame ground on the rear panel of the equipment to
ground. If power is supplied without grounding the
equipment, there is a risk of receiving a severe or fatal
electric shock.
The operator cannot repair this equipment. DO NOT
attempt to remove the equipment covers or to disassemble
internal components. Only qualified service technicians
with knowledge of electrical fire and shock hazards should
service this equipment. There are high-voltage parts in this
equipment presenting a risk of severe injury or fatal electric
shock to untrained personnel. In addition, there is a risk of
damage to precision components.
If this equipment is used in a manner not specified by
the manufacturer, the protection provided by the
equipment may be impaired.
13000-000109 iii
June 2003