Anritsu MT8850A, MT8852A Environmental Requirements , Rack Mounting

MT8850A / MT8852A Bluetooth Test Set Installation

Environmental Requirements

The MT8850A/MT8852A is designed to operate within the temperature range of 5 to 40° C

(41 to 104° F) with a maximum humidity of 90% at 40° C (104° F), non-condensing. Full

accuracy is specified at 5 to 35° C (23 to 95° F).

Although not recommended, operation in temperatures to –20°C

(–4° F) is possible. At these temperatures, however, the liquid crystal display may exhibit

excessively slow response.

CAUTION The instrument is cooled by a fan at the rear, which circulates air

round the instrument through the vent holes in the base. The fan and

the vent holes should not be blocked.

Rack Mounting

The MT8850A/MT8852A Bluetooth Test Set can be ordered with rack mounting hardware

that allows the instrument to be mounted into a standard 19-inch equipment rack. There

are two rack mount option kits available:

The MT8850A-01 Rack Mount option allows the installation of a single

MT8850A/MT8852A in either the left or right side rack position.

The MT8850A-03 Rack Mount option allows side-by-side mounting of two

MT8850A/MT8852A Test Sets.

This section describes the assembly procedure for fitting a single MT8850A/MT8852A

Bluetooth Test Set into an instrument rack. The MT8850A/MT8852A universal top and

bottom covers have removable feet to allow the rack mount kit to be fitted. The procedure

involves fitting the support bracket, front plate, base panel, and a rear support bracket to

the MT8852A. The MT8850A/MT8852A can then be loaded and secured in the rack

position.

Kits Parts List

Anritsu No. Description Quantity Max Torque

Setting

50077 Front face plate 1.0

900-848 M4, kep nut. 2.0 14 lbf.in [158

cNm]

790-319 Speed nut 4.0

900-345 #4, sst, washer, flat 8.0

900-821 Decorative screw 4.0

905-68 M3x8, pos, sst, patchlock,

screw, metric, pan head.

8.0 4 lbf.in [45 cNm]

788-575 Snap rivet, plastic 6.0

C37276 Rack mount, side, bracket 1.0

C41449 Rear support, bracket, rack

1.0

3-2 13000-000109

Environmental Requirements June 2003