Revision B

MX28B-1200 PRODUCT MANUAL

1. GENERAL INFORMATION

1.1Introduction

DC Power Plants from APC have unique features that make them easy to install, maintain, and upgrade. The rectifier units are modular and truly “hot-pluggable” into the shelf assembly without any separate ac wiring.

All system settings are made from the system control unit that provides monitoring and control functions for each component of the system as well as alarm listings for system diagnosis and maintenance.

The APC international network of sales and service offices and qualified representatives provides sales assistance for proposals, purchases, and after-sales support.

APC provides nationwide 24-hour, 7-day service response by dialing:

(800) 800-4APC

This service will answer your call, gather specific service information, and have a qualified APC service representative contact you as quickly as possible (refer to section on customer service and support).

1.2Precautions

It is extremely important to read, understand, and strictly follow the instructions in sections on installation and setup. Also, please note the special SAFETY PRECAUTIONS outlined in Section 5.1.4 before beginning actual installation of the power system.

If any precautions are not clearly understood, or local conditions are not covered, contact the nearest APC representative or APC at (214) 342-5000 for clarification.

Also, refer to all applicable federal, state, and local regulations, and industry guidelines for correct installation of this power system.

1.3Inspection upon Receipt of Goods

1.3.1 General

APC has taken precautions in packing the power equipment for shipment to ensure its safe arrival; however, the entire shipment including any boxes or crates should be inspected upon receipt for evidence of damage that may have occurred during transit.

1.3.2 Visible External Damage

It is the responsibility of the person receiving the shipment to inventory and inspect all materials against the bill of lading or waybill provided IMMEDIATELY upon taking delivery while the carrier representative is STILL ON SITE. Please be sure that all items are accounted for, including the correct number of pallets and the quantity of accessory and/or component boxes. Also, note any visible external damage that may have occurred during transit.

If damage has occurred or the quantity of items is not correct, then:

1) Make a descriptive notation on the delivery receipt before signing.

MX28B-1200/2400

1

Page 7
Image 7
APC MX28B-1200 manual General Information, Introduction, Inspection upon Receipt of Goods General, Visible External Damage