CHAPTER 4: INSTALLATION
26
Blank cover plates must be
installed over slots that do not
contain battery or power modules.
3. Install the bezels .
4. Install the PowerView Display .
• Connect the cable to the Main
Intelligence Module (MIM).
• Align the tabs on the sides of the bezel
with the slots on the front of the UPS
frame and gently snap it into place.
5. Install and connect any Smart Slot accessory
in the appropriate accessory port .
See the APC website at http://www.apc.com
for available accessories. Refer to the
accessory manual for installation and setup
information.