APC 412 kVA, SYBT3 CHAPTER 2: GETTING STARTED , Powering Up the Load Equipment

CHAPTER 2: GETTING STARTED
4
Powering Up the Load Equipment
Follow the steps below to turn ON the output of the UPS and power the load equipment.





>Control Logging
Status Display
Setup Diags
Accessories Help
>Turn Load On
Do Self Test
Simulate Power Fail
Graceful Reboot
Confirm:
Turn UPS ON
NO, ABORT
> YES, Turn UPS ON
UPS HAS BEEN
COMMANDED TO TURN
LOAD POWER ON
UPS LOAD IS ON
Press any key...
1. Use ‘ESC’ to view to Main Menu , and then
select CONTROL.
2. Select the TURN LOAD ON  command.
3. Confirm choice by selecting YES .
4. You will hear some clicking sounds and see
message .
5. In approximately 30 seconds, you will see
message , and the green LOAD ON status
indicator will be ON.
The output is now ON and fully protecting the
load equipment.