APC SYBT3, 412 kVA Output Specifications, Physical Specifications, Compliance Specifications

CHAPTER 5: SPECIFICATIONS

	Output Specifications
Nominal Output Voltage	200, 208, 220, 230, 240 Vac; 50 or 60 Hz, 1 phase, 3 wire
Output Power kVA	4 – 16 kVA
Output Power kW	2.8 – 11.2 kW
Load Power Factor	0 – 1
Output Frequency	60 or 50 Hz nominal
Output Voltage Regulation	< ± 3% for no load to full load, min ac input to max ac, min dc to max dc,
Steady State	linear or non-linear load or any combination
Output Voltage Regulation	< ± 5% for 100% load application or removal, linear or non-linear load
Transient/Dynamic
Recovery Time	< 10 milliseconds (i.e. half cycle to steady state)
Total Harmonic Distortion	< 2% for linear loads; < 5% for non-linear loads.
Load Crest Factor Supported	< 5% for 100% non-linear loads up to 5:1
Overload Capacity	130% for 10 minutes. With N+1
Efficiency	Approximately 90% @ full load—linear or non-linear loads
	Physical Specifications
Audible Noise	< 62 dBA
Dimensions (H x W x D)	26.1 in x 18.9 in x 27.8 in (with bezel)
	(66.3 cm x 48.0 cm x 70.6 cm)
Weight – Fully Loaded	Approximately 557 lb (133.6 kg)
Heat Dissipation (Full Load)	4246 BTUs typical – Batteries charged
	9664 BTUs typical – Batteries charging
	Compliance Specifications
VDE-GS Certifications	EN 60950, EN 50091-1-1, EN 50091-2, IEC 60950, IEC 146-4,
	VDE 0558 and VDE 0805
UL Listing	UL 1778
CSA Certification	CSA 107.1

32