CHAPTER 2: GETTING STARTED 3
Turning on the UPS Follow the steps below to turn ON the UPS.
• The factory default
Monitoring screen is shown.
Your actual screen may
vary.
• After the PowerView has
been inactive for 10 minutes
(user settable), the display
will revert to the Monitoring
screen.
PowerView RM
Rev: A English
Please wait...
Fuel 100% ▌▌▌▌▌▌▌▌▌
Load 000% ---------
220Vin 000Vout 60Hz
Runtime: 00hr 30min
>Control Logging
Status Display
Setup Diags
Accessories Help
1. Ensure that branch (mains) power is supplied to
the system.
2. Ensure that the input circuit breaker on the UPS
is turned ON.
3. Turn the System Enable switch ON. The
Startup screen appears on the LCD.
After initialization, the Monitoring Screen
appears, providing a concise view of key
operating parameters.
Fuel Percentage of battery capacity
available
Load Percentage of power capacity used
Vin Input voltage
Vout Output Voltage
Hz Output Frequency
Runtime
Runtime expected based on
battery capacity and connected
load
4. At the Monitoring screen, press any navigation
key to open the Main Menu . This menu
contains items that access eight submenus.
5. To open a submenu, move the selection arrow
to its item and press the ENTER key.