APC SYBT3, 412 kVA installation manual Messages

CHAPTER 4: MESSAGES

	PowerView Message	Meaning	Corrective Action
Start-Up	AC adequate for UPS but	The UPS will function on-line with the	Option 1: Improve the incoming
(continued)	not for bypass.	input voltage, but in the event that	voltage.
		bypass is required, the input voltage is
		not adequate to power the load	Option 2: Proceed with startup.
		equipment.	Normal bypass is not available.
	Low/No AC input, startup	Input voltage is not adequate to start the	Option 1: Abort startup until
	on battery.	UPS. If startup proceeds, the UPS will	acceptable input voltage is
		function from battery.	present.
			Option 2: Proceed with startup.
			Battery will be discharged.
General	# of batteries increased.	At least one battery module has been	No corrective action necessary.
Status		added to the system.
	# of batteries decreased.	At least one battery has been removed
		from the system.
	# of Pwr Modules	At least one power module has been
	increased.	added from the system.
	Intelligence Module	A MIM has been installed into the UPS.
	inserted.
	Intelligence Module	A MIM has been removed from the UPS.
	removed.
	Redundant Intelligence	A RIM has been installed into the UPS.
	Module inserted.
	Redundant Intelligence	A RIM has been removed from the UPS.
	Module removed.
	# of External Battery	At least one external battery cabinet has
	Cabinets increased.	been connected to the frame.
	# of External Battery	At least one external battery cabinet has
	Cabinets decreased.	been disconnected from the UPS.

18