1Open the ejectors on the DRAM DIMM slots you want to use by pushing down on them.
2Align a DRAM DIMM in the DRAM slot as pictured and push the DIMM down until the ejectors snap into place.
Important Do not touch the DIMM’s connectors. Handle the DIMM only by the edges.
DRAM DIMM (Your DIMM’s shape and components may vary.)
The DRAM DIMM is designed to fit into | Connectors | Notches | DRAM slot (1 of 3) |
the slot only one way. Be sure to align the |
|
|
|
notches in the DIMM with the small ribs |
|
|
|
inside the slot. With the ejectors in the |
|
|
|
open position (as shown), push down |
|
|
|
on the DIMM until it snaps into place. |
|
|
|
The ejectors will automatically close. |
|
|
|
Ejector |
|
|
|
(Your slot may have one or two ejectors. |
| Ribs (inside slot) |
|
They should be pushed outward and down |
|
| |
|
|
| |
to be in the open position, as shown.) |
|
|
|
3Close the computer.
Working Inside Your Computer | 55 |
