Apple G4 manual For More Information on Using Ethernet

To connect your Macintosh to a centralized 10/100/1000 twisted-pair Ethernet network, follow these steps:

1Plug one end of an RJ-45 twisted-pair cable into the Ethernet port on your Macintosh.

2Plug the other end of the cord into an RJ-45 wall outlet or external hub that is connected to a twisted-pair Ethernet network.

Ethernet port	RJ-45 wall plate	Ethernet hub
(Twisted-pair		or switch
Ethernet)

Twisted-pair Ethernet cable

After you start up the computer, you need to configure the software for your network connection. Your network administrator can provide the necessary information. You can also get help configuring your network software using Mac Help (in the Help menu).

For More Information on Using Ethernet

Additional information, including setting up an Ethernet network or transferring files using Ethernet, is available in Mac Help. Choose Mac Help from the Help menu and search for “Ethernet” or “network.”

For information on networking products you can use with your Power Mac G4, go to the Macintosh Products Guide at www.apple.com/guide

Using Your Computer 45