Apple G4 manual Plugging In the Computer, You can skip this step

Plugging In the Computer

1Set the voltage switch on the back of your computer to the correct voltage, if necessary. m If your computer doesn’t have a voltage switch, the correct voltage is set automatically

and you can skip this step.

m If your computer has a voltage switch, make sure the voltage switch is set for the voltage system in your country.

The voltage switch must be set correctly to avoid damaging your computer.

Your computer may have a voltage switch on the back.

If you need to change the setting, insert a small screwdriver in this slot and slide the switch.

Set the switch to show “115” for AC voltages in the 100–120V range. Set the switch to show “230” for AC voltages in the 200–240V range.

6 Chapter 1