Press the card gently but firmly until the connector is fully inserted.
mDon’t rock the card from side to side; instead, press the card straight into the slot.
mDon’t force the card. If you meet a lot of resistance, pull the card out. Check the connector and the slot for damage or obstructions, then try inserting the card again.
mPull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors are barely visible, the card is connected.
4Reinsert the port access cover screw and tighten it to hold the card in place.
Warning If you removed a card from your computer and did not install a replacement, be sure to place a port access cover over the empty slot. Do not leave an empty slot without a cover. An uncovered slot can affect the air flow that cools the computer’s internal components and cause damage.
5Close the computer.
Working Inside Your Computer | 69 |
