Analog audio line in (typical values)

Based on a typical situation with playback of a 1 kHz, -3 dBFS 24-bit sine wave, 44.1 kHz output sample rate, unless otherwise specified below.

ÂÂ Maximum input voltage: 2 Vrms (+8.2 dBu)

ÂÂ Input impedance: Greater than 17 kilohms

ÂÂ Signal-to-noise ratio: Greater than 90 dB

ÂÂ Total harmonic distortion + noise: Less than -85 dB (.006 percent)

ÂÂ Channel separation: Greater than 85 dB

Analog audio line out (typical values)

Based on a typical situation with playback of a 1 kHz, -3 dBFS 24-bit sine wave, 44.1 kHz output sample rate into 100 kilohms, unless otherwise specified below.

ÂÂ Output voltage: 2 Vrms (+8.2 dBu)

ÂÂ Output impedance: 33 ohms

ÂÂ Signal-to-noise ratio: Greater than 90 dB

ÂÂ Total harmonic distortion + noise: Less than -85 dB (.006 percent)

ÂÂ Channel separation: Greater than 85 dB

External microphone input using the headphone jack (typical values)

Based on a typical situation with playback of a 1 kHz, 28 mVrms sine wave, 44.1 kHz input sample rate, 24-bit sampling, unless otherwise specified below.

ÂÂ Maximum input voltage: 39 mVrms (-26 dBu)

ÂÂ Input impedance: Greater than 1 kilohm

ÂÂ Signal-to-noise ratio: Greater than 60 dB

Chapter 5   What’s Under the Hood

111

Page 111
Image 111
Apple MC560LL/A, MC561LL/A, MD772LL/A manual Analog audio line in typical values, Analog audio line out typical values, 111