Installing Serial ATA Hard Disk Drives

Your Mac Pro can accommodate up to four internal 1-inch-high SATA hard disk drives in the drive bays. If your Mac Pro comes with a single drive installed, it’s in the first drive bay. You can install drives in the second, third, and fourth drive bays.

To install a hard disk drive:

1Open your Mac Pro and remove the side panel following the instructions in “Opening Your Mac Pro” on page 39.

2Lift the latch to unlock the drive carriers.

Note:  When the latch is down, the carriers are locked in the drive bays and can’t be removed.

3Pull the carrier out of the drive bay.

Drive carrier

62Chapter 3   Making a Good Thing Better

Page 62
Image 62
Apple MD770LL/A, MC561LL/A, MD772LL/A, MC560LL/A manual Installing Serial ATA Hard Disk Drives, To install a hard disk drive