6Align the card’s connector with the expansion slot and press the card into the slot.

PCI slider

Hook on card

Retention bar

PCI Express slot

7Press the card gently but firmly until the connector is fully inserted. Press only on the bare areas of the card to avoid damaging the components. Don’t rock the card from side to side or force it. If you meet resistance, check the connector and slot for damage or obstructions, and then try inserting the card again.

8Pull the card gently to make sure it’s properly connected. If it stays in place and its gold connectors are barely visible, the card is connected.

9Move the PCI slider to the right to secure the card.

Chapter 3   Making a Good Thing Better

77

Page 77
Image 77
Apple MD772LL/A, MC561LL/A, MD770LL/A, MC560LL/A manual PCI slider Hook on card Retention bar