Troubleshooting | Symptom Charts/System - 10 |
| 2) Disconnect hard drive SCSI cable and power cable. |
| 3) Remove hard drive from chassis. |
| 4) Turn drive over and examine part number label on |
| SCSI connector (removing drive carrier if necessary). If |
| label reads “1280S p/n TM12S012” and “REV |
| replace drive. |
| Note: Only Revision “02” drives cause this problem; there- |
| fore, make sure bar code label includes the words “REV 02- |
| B” before replacing hard drive. |
