Upgrades | Power Macintosh 7600 Upgrade - 6 | |
3 | Install the EMI clip that came with the Upgrade Kit onto |
|
| the Power Macintosh 7600 logic board in the same | |
| location as the one you removed from the old logic board | |
| at the very beginning of the upgrade procedure. | |
| IMPORTANT: Once you have installed the EMI clip, do not | |
| set down the logic board or you may damage the board. Be | |
| sure to install the logic board into the bottom housing | |
| immediately. | |
4 | Install the logic board in the computer. | |
5 | Install on the Power Macintosh 7600 logic board any | |
| cache, DRAM, or VRAM DIMM(s) that you removed | |
| earlier from the Power Macintosh 7200 logic board. | |
