| Troubleshooting |
| Symptom Charts/Peripherals - 18 |
Drive does not appear | 1 | Verify there are no duplicate SCSI device addresses. | |
on the desktop | 2 | Update SCSI device driver using Drive Setup. Check drive’s | |
|
| 3 | directory structure using Disk First Aid. |
|
| Replace SCSI hard drive cable. | |
|
| 4 | If drive is not initialized, use Drive Setup to initialize. |
|
| 5 | Replace with |
|
| 6 | If hard drive still doesn't work, switch back to original hard |
|
|
| drive and replace logic board. |
Works with internal | 1 | Verify there are no duplicate SCSI device addresses. | |
or external SCSI | 2 | Replace terminator on external SCSI device. | |
devices but not with | 3 | Verify that SCSI device at end of internal SCSI data cable is | |
both | 4 | only device terminated. | |
|
| Refer to appropriate manual to troubleshoot defective | |
|
|
| external device. |
