Take Apart | VRAM DIMMs - 57 | |
| Replacement Note: Position the DIMM evenly over the slot |
|
| and press down gently to install it. The release latch should | |
| click into place. Do not force the DIMM or you may damage it. | |
| Make sure the DIMM is evenly seated. | |
| Note: These computers use VRAM DIMMs | |
| or faster) instead of VRAM SIMMs. The VRAM SIMMs used in | |
| earlier Power Macintosh models are not compatible. | |
| Note: 1 MB of VRAM is soldered to the board. To go to 2 MB, | |
| install one 1 MB VRAM DIMM in slot 1. To go to 4 MB, install | |
| three 1MB VRAM DIMMs in slots 1, 2, and 3. VRAM slots 2 | |
| and 3 must be populated together. | |
