DVR Station | User Manual - version 1 |
Verifying the Channel List
1.From the “TV Control” screen, select “Set TV Channel List”.
2.This list was created from the channel
3.Here you can deselect/select a channel or change the number of a channel.
Setting the infrared Emitter
•The DVR Station has a
•It allows your ARCHOS device to communicate with your tuner (VCR, cable box, satellite receiver or Digital TV receiver), so that it can turn it on and off, and change channels on it.
•This is a one time step to set your ARCHOS device to send the correct infrared codes to control your tuner. If you do not plan on making sched- uled recordings, then you do not need to set the infrared emitter code.
1st Test: turning your tuner off
1.From the “TV Control” screen, select “Set Infrared Emitter”. This first screen allows you to correctly set the codes and parameters so that the ARCHOS can turn your tuner on/off automatically (for a scheduled recording).
2.“TV Receiver”: select the type of tuner that you want to control with the IR Emitter (“VCR”, “Cable/DSL box”, “Satellite Receiver”, “DVD Recorder” or “Digital TV”).
3.“Receiver brand”: choose the brand of your tuner. You can use the 
buttons on the remote control to scroll the list faster.
4.Select the “Test power Off code” button. Make sure that your tuner is on. Your ARCHOS device will then try to turn your tuner off. After a few seconds, your ARCHOS will ask you if the device responded correctly:
If your tuner turned off, select “Yes”, and move on to the next section.
If your tuner did not turn off, select “No, try next code”. Your device will try turning the tuner off again, us- ing a different code. Repeat this operation until the ARCHOS manages to turn the tuner off.
If none of the codes work, check that the DVR Station is positioned in a way that allows the infrared signal to reach your tuner’s receiver. Note: In some rare cases the ON/OFF functionality may not work.
15
