Removing the overheat thermostat
1.Disconnect the overheat thermostat electrical connections “N1” (FIG. 1.54);
2.Then remove the thermostat from its mounting by releasing the securing clip (FIG. 1.55).
N1
80.eps | FIG. 1.54 |
|
|
83.eps | FIG. 1.55 |
Removing the D.H.W. temperature sensor (N.T.C.)
1.Pull off the electrical connector “Q1” and unscrew the sensor probe using a suitable spanner (FIG. 1.57).
| Q1 |
60.eps | FIG. 1.57 |
Removing the divertor valve actuator
1.Unplug the electrical connector “R1” (FIG. 1.58);
2.Release the retaining clip “S1” and remove the divertor valve actuator.
R1
S1
74.eps | FIG. 1.58 |
Removing the heating temperature sensor (N.T.C.)
1.Pull off the electrical connector “P1” and unscrew the sensor probe using a suitable spanner (FIG. 1.56).
|
|
|
|
|
| P1 |
|
|
|
|
|
| FIG. 1.56 | 87.eps |
|
|
|
|
|
Removing the D.H.W. flow switch
1.Unplug the electrical connector “T1” (FIG. 1.59);
2.Release the retaining clip “V1” and remove the D.H.W. flow switch.
V1
30.eps | T1 | FIG. 1.59 |
B063 | 15 |
