Base/Extended/Total Memory [xxxK]

The base memory, extended memory, and total memory values are auto- detected. These fields are not user-configurable.

5.3.1 Primary IDE Master

Primary Master

 

Primary IDE Master

[Auto]

 

Access Mode

[Auto]

 

Capacity

0

MB

Cylinder

0

 

Head

0

 

Precomp

0

 

Landing Zone

0

 

Sector

0

 

PIO Mode

[Auto]

 

UDMA Mode

[Auto]

 

Transfer Mode

None

 

S.M.A.R.T Status

None

 

Select Menu

Item Specific Help

Selects the type of fixed disk connected to the system.

[Manual] lets you select the number of cylinders, heads, etc. Note: PRECOMP-65535 means NONE.

Primary IDE Master [Auto]

Select [Auto] to automatically detect an IDE drive. If automatic detection is successful, the setup BIOS automatically fills in the correct values for the remaining fields on this sub-menu.

If automatic detection fails, this may be because the IDE drive is too old or too new. If the drive was already formatted on a previous system, the BIOS may detect incorrect parameters. In these cases, select [Manual] to manually enter the IDE drive parameters. Refer to the section “Manually detecting an IDE drive.”

If no drive is installed or if you are removing a drive and not replacing it, select [None]. Configuration options: [None] [Auto] [Manual]

5-12

Chapter 5: BIOS setup