2.10.3 SATA/SCSI backplane
To remove the SATA/SCSI backplane:
1.Remove the HDD fan cage. Refer to section “2.10.2 HDD fans” for instructions.
2.Disconnect all cables from the SATA/SCSI backplane.
When disconnecting a cable, hold and firmly pull the cable plug. DO NOT pull the cable itself. Doing so may damage the cable!
3.From the inner edge, push the backplane outward so that the outer edge protrudes slightly from the slot.
4.From the outer edge, firmly hold the backplane and carefully slide it out.
Chapter 2: Hardware setup |