3.IDE connectors (40-1 pin PRI_IDE [blue], SEC_IDE [white])

This connector supports the provided UltraDMA/100/66 IDE hard disk ribbon cable. Connect the cable’s blue connector to the primary (recommended) or secondary IDE connector, then connect the gray connector to the UltraDMA/100/66 slave device (hard disk drive) and the black connector to the UltraDMA/100/66 master device.

• Refer to the hard disk drive label or documentation when setting the device as master or slave.

•Pin 20 on each IDE connector is removed to match the covered hole on the UltraDMA cable connector. This prevents incorrect orientation when you connect the cables.

NCCH-DL

NCCH-DL IDE connectors

PRI_IDE

PIN 1

SEC_IDE

PIN 1

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to pin 1.

4.GAME/MIDI connector (16-1 pin GAME1)

This connector supports a GAME/MIDI module. Connect the GAME/MIDI cable to this connector. The GAME/MIDI port on the module connects a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.

NCCH-DL

NCCH-DL Game connector

+5V J1B2 J1CY GND GND J1CX J1B1 +5V GAME1

MIDI _MIDI_ INJ2B2J2CYOUTJ2CXJ2B1+5V

ASUS AP1720-E2 barebone server

4-9