1. Use the [Enhanced Mode] option if you installed a native operating system like Winows 2000/XP.

2.You may not use this option if you are using Linux RedHat 8 or 9 version operating system, as they do not support native mode.

d.Setting to [SATA Only] allows you to install IDE devices on the Serial ATA channels only.

e.Setting to [Disabled] disables the onboard SATA controller. The RAID feature is also disabled.

SATA Mode [IDE]

When this item is set to [IDE], SATA operates in IDE mode. When set to [RAID], SATA operates in RAID mode. The RAID feature allows configuration of the installed IDE devices into a disk array. Configuration options: [IDE] [RAID]

Serial ATA Port0 Mode [SATA0 Master]Serial ATA Port1 Mode [SATA1 Master]

Allow you to set the SATA Port0 and Serial ATA Port1 modes. The options for these items vary depending on the setting of the On-Chip Serial ATA item. Configuration options: [Primary Master] [Primary Slave] [Secondary Master] [Secondary Slave] [SATA0 Master] [SATA1 Master]

ASUS AP1720-E2 barebone server

5-27