Onboard LAN Boot ROM [Disabled]

Allows you to enable or disable the onboard LAN device boot ROM. Configuration options: [Disabled] [Enabled]

Onboard 1394 [Enabled]

Allows you to enable or disable the onboard IEEE 1394 controller. Configuration options: [Disabled] [Enabled]

Onboard Promise Controller [Enabled]

Allows you to enable or disable the onboard Promise® RAID controller.

Operating Mode [IDE]

Allows you to set the RAID controller operating mode. This item is configurable only when the Onboard Promise Controller item is set to [Enabled]. Configuration options: [IDE] [RAID]

SuperIO Device

SuperIO Device

Select Menu

Serial Port1 Address

[3F8/IRQ4]

Item Specific Help

Serial Port2 Address

[2F8/IRQ3]

Set Base I/O address

Onboard Parallel Port

[378/IRQ7]

Parallel Port Mode

[SPP]

for serial port 1.

EPP Mode Select

EPP1.7

 

ECP Mode Use DMA

3

 

Serial Port 1 Address [3F8/IRQ4]

Serial Port 2 Address [2F8/IRQ3]

Allow you to select the serial port base addresses. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] [Auto]

5-24

Chapter 5: BIOS setup