4.2Jumpers

1.Keyboard power (3-pin KBPWR1)

This jumper allows you to enable (pins 2-3) or disable (pins 1-2) the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. Refer to Chapter 5 for information.

NCCH-DL

KBPWR1

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

NCCH-DL Keyboard power setting

2.RAID controller setting (3-pin RAID_EN1)

This jumper allows you enable or disable the Promise® PDC20319 RAID controller.

NCCH-DL

RAID_EN1

1

2

 

2

3

 

 

 

 

 

Enable Disable (Default)

NCCH-DL RAID controller setting

4-4

Chapter 4: Motherboard info