5.3.5 Third IDE Master

When configuring a drive as Third IDE Master, refer to section “4.3.1 Primary IDE Master” for the menu item descriptions which are not discussed in this section.

Third IDE Master

Extended IDE Drive

[Auto]

 

Access Mode

[Auto]

 

 

 

 

Capacity

0

MB

Cylinder

0

 

Head

0

 

Precomp

0

 

Landing Zone

0

 

Sector

0

 

Transfer Mode

None

 

S.M.A.R.T Status

None

 

Select Menu

Item Specific Help

Selects the type of fixed disk connected to the system.

Extended IDE Drive [Auto]

When set to [Auto], allows automatic selection of the extended IDE drive installed, if any. Set this item to [None] if there is no extended IDE drive, or if you do not wish to detect the drive even if installed. Configuration options: [None] [Auto]

Access Mode [Auto]

Configuration options: [Large] [Auto]

5.3.6 Fourth IDE Master

When configuring a drive as Fourth IDE Master, refer to section “4.3.1 Primary IDE Master” and section “5.3.5 Third IDE Master” for the menu item descriptions.

The items Third IDE Master and Fourth IDE Master appear only if you set the On-Chip Serial ATA item in SATA Configuration menu to either [Auto] or [Enhanced Mode]. See page 5-26 for information.

5-16

Chapter 5: BIOS setup