3.3Upgrading to a dual or redundant
power supply
Perform this installation if you wish to upgrade your barebone server system from 600 W single power supply to 600 W dual or redundant power supply.
1.Remove the single power supply following the instructions in the section “2.10 Removable components”.
2.Lay the system on its side on a flat surface, then remove the metal stopper screw under the power supply cage.
Keep the screw for later use.
3.Locate and remove the metal stopper from inside the power supply cage.
Keep the metal stopper for later use.
4.Insert the power supply cables and plugs to the power supply cage.
ASUS |