Wait for ‘F1’ If Error [Enabled]

When set to Enabled, the system waits for the F1 key to be pressed when error occurs. Configuration options: [Disabled] [Enabled]

Hit ‘DEL’ Message Display [Enabled]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

5.6.3Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

BIOS SETUP UTILITY

Boot

Security Settings

 

<Enter> to change

 

 

Supervisor Password

: Not Installed

password.

User Password

: Not Installed

<Enter> again to

 

 

disable password.

Change Supervisor Password

 

 

Change User Password

 

 

 

 

 

 

Select Screen

 

 

 

Select Item

 

 

+-

Change Option

 

 

F1

General Help

 

 

F10Save and Exit

 

 

ESCExit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item, then press <Enter>.

2.From the password box, type a password composed of at least six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

5-30

Chapter 5: BIOS setup