3.The View Array screen appears. Here you can view properties of the RAID array(s) created. If you have configured a hot spare, it will also be listed. If you created more than one array, you may view the next array by pressing
<Alt+N>.
LSI Corp Config Utility | v6.20.00.00 (2007.12.04) |
View Array |
|
Array | 1 of 1 |
Identifier | LSILOGICLogical Volume 3000 |
Type | IME |
Scan Order | 0 |
Size(MB) | 51498 |
Status | Optimal |
Manage Array |
|
| Slot | Device Identifier |
| RAID | Hot | Drive | Pred | Size | |
| Num | SEAGATE ST336754SS | 0003 | Disk | Spr | Status | Fail | (MB) | |
0 | Yes | No | Ok | No | 34331 | ||||
2 | SEAGATE ST336754SS | 0003 | Yes | No | Ok | No | 34331 | ||
3 | SEAGATE ST336754SS | 0003 | Yes | No | Ok | No | 34331 | ||
|
|
|
|
|
|
| |||
| Esc = Exit Menu | F1/Shift+1 = Help |
|
| R = Refresh Display | ||||
| Enter=Select Item | Alt+N=Next Array | C = Create an array | ||||||
|
|
|
|
|
|
|
|
|
|
Chapter 6: RAID configuration |