2.Press <Ctrl-I> to enter the Intel Matrix Storage Manager RAID configuration utility after POST.

3.If there is available Non-RAID SATA Hard Disk, the utility will prompt the windows for rebuilding the RAID. Press <Enter> to select the port of destination disk for rebuilding or press <ESC> to exit

The size of destination disk for rebuilding should be the same or bigger as the original hard disk.

4.After selecting, the volumes with “Rebuild” status will be rebuilt within the operating system.

5.Exit the SATA RAID utility. When operating system is running, select the Intel

Matrix Storage Console from the Start Menu or click the Intel Matrix Storage Manager tray icon.

6.From the View menu, select ‘Advanced Mode’ to display a detailed view of the Intel Matrix Storage Console.

7.From the Volumes view in the device pane, select the RAID volume. The status will display ‘Rebuilding % complete’. After the rebuild is complete, the status will display ‘Normal’.

ASUS TS300-E5

6-39