To clear the supervisor password, select the Change Supervisor Password then press <Enter>. The message “Password Uninstalled” appears.
If you forget your BIOS password, you can clear clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section 4.2 Jumpers for information on how to erase the RTC RAM.
After you have set a supervisor password, the other items appear to allow you to change other security settings.
BIOS SETUP UTILITY
Boot
Security Settings |
| <Enter> to change | |
|
| ||
Supervisor Password | : Installed | password. | |
User Password | : Not Installed | <Enter> again to | |
|
| disable password. | |
Change Supervisor Password |
|
| |
User Access Level | [Full Access] |
|
|
Change User Password |
|
|
|
Clear User Password |
|
|
|
Password Check | [Setup] |
|
|
|
|
| Select Screen |
|
|
| Select Item |
|
| +- | Change Option |
|
| F1 | General Help |
|
| F10Save and Exit | |
|
| ESCExit |
v02.58 (C)Copyright
This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access]
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field. Limited allows changes only to selected fields, such as Date and Time. Full Access allows viewing and changing all the fields in the Setup utility.
Change User PasswordSelect this item to set or change the user password. The User Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.Select the Change User Password item and press <Enter>.
ASUS |