Menu | Description |
Configure | Allows you to create RAID 0 or RAID 1 set using the Easy |
| Configuration or the New Configuration command. This menu also |
| allows you to view, add, or clear RAID configurations or select the |
| boot drive |
Initialize | Allows you to initialize the logical drives of a created RAID set |
Objects | Allows you to initialize logical drives or change the logical drive |
| parameters |
Rebuild | Allows you to rebuild failed drives |
Check Consistency | Allows you to check the data consistency of the logical drives of a |
| created RAID set |
6.2.1Creating a RAID 0 or RAID 1 set
The LSI Logic Embedded SATA RAID Setup Utility allows you to create a RAID 0 or RAID 1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
1.From the utility main menu, highlight Configure, then press <Enter>.
2.Use the arrow keys to select Easy Configuration, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
|
|
| Configuration Menu |
| |
|
| Easy Configuration |
| ||
| Management | MenuNew | Configuration | ||
Configure | View/Add | Configuration | |||
Initialize | Clear | Configuration | |||
Objects | Select | Boot Drive | |||
Rebuild |
|
|
|
| |
Check Consistency |
|
| |||
|
|
|
|
|
|
Defines Physical Arrays. An Array Will Automatically Become A VD
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
ASUS |