(in PX4 model only)
The back side of the SATA/SAS connectors are attached to the ASUS SASsaby 1064E SAS RAID controller card via the supplied SAS cables. Refer to the illustration below for the location of the SAS connectors. Refer to the table for the default SAS cable connections.
SAS RAID controller
SAS Port 1
SAS Port 2
SAS Port 3
SAS Port 4
1 |
|
|
|
|
| SAS HDD Activity LED connector |
| |||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| (connect to the SATA/SAS backplane) |
| |
|
|
|
|
|
|
|
|
|
|
|
Backplane ID |
| SAS Port number | Connected to | Controlled by | ||||||
| (on SASsaby 1064E) | |||||||||
|
|
|
|
|
|
|
|
|
| |
SAS Port 0 |
|
|
| Port 0 | SAS Port 1 |
| ||||
SAS Port 1 |
|
|
| Port 1 | SAS Port 2 | LSI SAS 1064E | ||||
SAS Port 2 |
|
|
| Port 2 | SAS Port 3 | |||||
|
|
|
| |||||||
SAS Port 3 |
|
|
| Port 3 | SAS Port 4 |
| ||||
ASUS |