4.Plug the system fan cable to the connector FRNT_FAN2 on the motherboard.
2.10.2HDD blower (optional)
To remove the HDD blower:
1.Remove the side cover. Refer to section 2.1.1 Removing the side cover for instructions.
2.Disconnect the
3.Loosen the thumb screw that secures the HDD blower case to the chassis.
4.Firmly grip the blower case as shown, then slide it out of the chassis in the direction of the arrow until the tabs are released from the holes of the HDD cage.
Chapter 2: Hardware setup |