5.The Select New Array Type screen appears.
Use the arrow keys to select Create IM Volume, then press <Enter>.
LSI Corp Config Utility | v6.20.00.00 (2007.12.04) | |||
Select New Array Type | ||||
| Create IM Volume |
| Create Integrated Mirror Array of 2 | |
|
|
| disks plus up to 2 optional hot spares. | |
|
|
| Data on the primary disk may be migrated. | |
|
|
| Create Integrated Mirrored Enhanced | |
| Create IME Volume |
| ||
|
|
| Array of 3 to 10 disks including up | |
|
|
| to 2 optional hot spares. | |
|
|
| ALL DATA on array disks will be DELETED! | |
|
|
|
| |
| Create IS Volume |
| Create Integrated Striping array of | |
|
|
| 2 to 10 disks. | |
|
|
| ALL DATA on array disks will be DELETED! | |
|
|
|
| |
Esc = Exit Menu | F1/Shift+1 = Help | |||
Enter = Choose array type to create
6.The Create New Array screen shows the disks you can add to make up the IM volume. Use the arrow key to select a disk, then move the cursor to the RAID Disk column. To include this disk in the array, press <+>,
You may also specify the Hot Spare disk here. Select the disk, then move the cursor to the Hot Spr column, then press <+>,
| LSI Corp Config Utility | v6.20.00.00 (2007.12.04) |
|
|
| |||||||
| Create New Array |
|
|
|
|
|
|
|
| |||
|
| Array Type: |
|
| IM |
|
|
|
|
| ||
|
| Array Size(MB): |
|
|
|
|
|
|
|
| ||
| Slot | Device Identifier |
| RAID | Hot | Drive | Pred | Size |
| |||
| Num |
|
|
| Disk | Spr | Status | Fail | (MB) |
| ||
|
| 0 | SEAGATE ST336754SS | 0003 |
| [No] | 35003 |
| ||||
|
| 1 | SEAGATE ST336754SS | 0003 |
| [No] | 35003 |
| ||||
| 2 | SEAGATE ST336754SS | 0003 |
| [No] | [No] | 35003 |
| ||||
| 3 | SEAGATE ST336754SS | 0003 |
| [No] | [No] | 35003 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Esc = Exit Menu | F1/Shift+1 = Help |
|
|
| C = Create array |
|
| |||
|
| SPACE/+/- = Select disk for array or hot spare |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
By default, the RAID Disk field shows No before array creation. This field is grayed out under the following conditions:
•The disk does not meet the minimum requirements for use in a RAID array.
•The disk is not large enough to mirror existing data on the primary drive.
•The disk has been selected as the Hot Spare for the RAID array.
•The disk is already part of another array.
ASUS |