2.1Chassis cover
The chassis features a “screwless design” that allows convenient assembly and disassembly. You can simply push or slide mechanical bolts and locks to remove the cover.
2.1.1Removing the side cover
1.Remove the two screws that secure
the cover to the chassis. | 1 |
|
1
2.Slide the side cover for about half an inch toward the rear until it is disengaged from the chassis.
3.Carefully lift the cover and set it aside.
2
Viewing the internal structure
Without the side cover, the internal structure and installed components of the barebone server vary depending on the model you purchased. Refer to section
1.5Internal features for the different model configurations.
Perform the procedures in the succeeding sections to install the CPU, system memory, disk drives, and expansion cards; replace fans and power supply; and connect the system cables.
Chapter 2: Hardware setup |