3.1Preparing the system for rack mounting
• The items required for the optional configurations described in this chapter are not included in the standard barebone system package. These items are purchased separately.
•We recommend that you allot at least 1U space above the server system to ensure optimal thermal performance.
3.1.1Removing the footpads or roller wheels
Refer to section 2.10.6 Chassis footpads and roller wheels for instructions on removing the footpads or roller wheels.
3.1.2Removing the top cover
To remove the top cover
1. | Remove the chassis cover. Refer to |
|
| ||
| section 2.1.1 Removing the side |
|
| cover. | 3 |
2. | Remove the front panel assembly. | |
| Refer to section 2.5.1 Removing |
|
| the front panel assembly. |
|
3.Carefully slide out the protruding portion of the top cover as shown.
4.Locate two round mylars on top cover.
5.Carefully remove each mylar using a sharp, flat object such as the edge of a cutter.
Chapter 3: Installation option |