6.2.4Initializing the logical drives
After creating the RAID set(s), you must initialize the logical drives. You may initialize the logical drives of a RAID set(s) using the Initialize or Objects command on the Management Menu.
Using the Initialize command
To initialize the logical drive using the Initialize command:
1.From the Management Menu, highlight Initialize, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Initialize Logical Drive(s) 
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2.The screen displays the available RAID set(s) and prompts you to select the logical drive to initialize. Use the arrow keys to select the logical drive from the Logical Drive selection, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
|
|
|
|
|
|
| Logical Drive(s) Configured |
|
|
| ||
|
| Management Menu | LD | RAID |
| Size | #Stripes | StripSz | Status |
| ||
| Configure | 0 | 10 | 154494MB | 4 | 64 KB | ONLINE |
| ||||
| Initialize |
| ||||||||||
|
|
|
|
|
|
|
|
|
| |||
| Objects |
|
|
|
|
|
|
|
|
| ||
| Rebuild |
|
|
|
|
|
|
|
|
| ||
| Check Consistency |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Logical Drives |
|
|
|
|
|
|
|
|
|
|
|
| Loical Drive 0 |
|
|
|
|
|
|
|
|
|
|
Select VD 
Chapter 6: RAID configuration |