AT&T 5840 user manual Feature Summary, System Announces DESCRIPTION/DIRECTIONS

5840_CIB_2ATT 2002.11.7 5:50 PM Page 54

ANSWERING SYSTEM OPERATION

FEATURE SUMMARY	Default settings indicated by *.
SYSTEM ANNOUNCES:	DESCRIPTION/DIRECTIONS:
“Change remote access code”	Set the remote access code you
50 *	will use to access features and
	functions of the answering system
	from a touch tone phone. The code
	can be changed to any two-digit
	number from 40–99.
“Change message alert”	When Message Alert is turned on,
Off *	the base beeps once every 10
On	seconds when new messages have
	been received.
“Change announce only”	When you turn Announce Only on,
Off *	callers hear your announcement,
On	but cannot leave a message.
“Change call screening”	When you turn Call Screening off,
On *	you will not hear incoming messages
Off	as the caller leaves them.
“Change number of rings”	Choose how many times the phone
2	will ring before the system answers
4 *	a call. With Toll Saver active, the
6	system answers after two rings
Toll Saver	when you have new messages and
	after four rings when you have no
	new messages.

•NOTE: Exit Feature Setup at any time by pressing a PLAY/STOP button.

54