5840_CIB_2ATT 2002.11.7 5:50 PM Page 65
PHONE
PROBLEM
To re-initialize the handset and base:
SOLUTION
1 Disconnect the power to the base.
2 Remove spare battery pack (if installed).
3 Remove the handset battery pack.
4 Wait at least 15 seconds.
5 Insert the handset battery pack.
6 Connect the power to the base.
PROBLEM
If you hear noise or interference when using the phone:
SOLUTION
•You may be out of range. Move closer to the base.
•Household appliances plugged into the same circuit as the base can sometimes cause interference. Try moving the appliance or the base to another outlet.
•The layout of your home or office may be limiting the operating range. Try moving the base to another location, preferably on an upper floor.
•Using the handset near household appliances (microwaves, computers, televisions, stereos, etc.) can sometimes cause interference. Move away from appliances while using the handset.
IN CASE OF DIFFICULTY
65
