Set Audio Mode, Set the Dial Mode, Set the Flash Time | AT&T 944

FEATURE SET UP

Set Audio Mode

Choose the mode (speakerphone or headset) the phone will automatically use to make and answer calls when the handset is in the cradle.

1Press G.

2Press -until the screen displays AUDIO MODE, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

NOTE: If you have programmed headset as the default mode but the headset is not plugged in, the phone will switch to speakerphone.

Set the Dial Mode

1Press G.

2Press -until the screen displays TONE/PULSE, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

Set the Flash Time

NOTE: If you are using this phone within the United States, there is no need to change the Flash Time from the default setting (0.7 seconds).

1Press G.

2Press -until the screen displays FLASH TIME, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Turn Hold Reminder On or Off

1Press G.

2Press -until the screen displays HOLD REMINDER, then press >.

3Press -or +to change the setting.

4Press Sto store your selection.

17

Image 18

AT&T 944 user manual Set Audio Mode, Set the Dial Mode, Set the Flash Time, Turn Hold Reminder On or Off

Contents

Four-Line Intercom Speakerphone Part 1 Important Product Information Contents Before YOU Begin Glossary Features List Feature Function Setting Options Audible Signals When you hear It means Installation Table/Desk InstallationInstall one 9V battery Connect the telephone line cords to the telephone Two Two-Line Jacks Wall Installation Install one 9V battery Connect the power adapter to the telephone Mount the phone on the wall Two Two-Line Jacks Convenience Ports Feature SET UP Feature Options Set the Time/Date Assign an Extension Number to Your PhoneTurn the Ringer On or Off for Each Line Set Delay Ring Select the Ringer TypeTurn Line Usage On or Off for Each Line Assign the Prime Line Line Preference Assign the Line Group for this PhoneTurn Auto-Mute On or Off Set the Flash Time Set Audio ModeSet the Dial Mode Turn Hold Reminder On or Off Program the Centrex Console Delayed Ring Time Erase All Settings and Return the Phone to Default SettingsSet Your Phone to be the Centrex Console Phone Telephone Operation Handset Telephone OperationMaking or Answering a Call Speakerphone Timer Switching ModesPause Do Not Disturb Canceling Call PrivacyCall Privacy Restoring Call Privacy Volume Line-in-Use LightsRedial Hold Switch Between LinesAuto Redial Speakerphone or Headset Temporary Tone Dialing MuteFlash Conference Calls To talk privately with one party Low Battery IndicatorTransfer a Call To drop one line Speed Dial Operation Storing a Number in a Speed Dial Location Reviewing a Speed Dial EntryMaking a Speed Dial Call Intercom Operation Basic Intercom Operations Making an Intercom Call with the Handset Answering an Intercom Call Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Making a Single-phone Making an Intercom Conference Call Paging All PhonesAnswering a System-wide Room Monitor Using a Fax Switch Adding a FAX Machine Case of Difficulty Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Telephone Does Not Ring Tone Signals Do Not Activate a Remote Device Operation During a Power FailureDisplay Screen is Blank Expanding the Phone System Line Groups Private Lines Enabling the Console Phone Setup ChecklistCentrex Operation Console Operation Setting Ring Delay Duration Answering a Delayed RingPicking Up Another Station’s Line Audio Mode 4 Index Reset ALL Advanced American Telephones. All rights reserved