Feature SET UP, Feature Options | AT&T 944 guide

FEATURE SET UP

Use the Navigation buttons to program or change the features setup.

	Scroll through
Enter	options
Enter
programming	Confirm
mode	Confirm
	option choice
	Store your
	selection and
	move to next
	feature
	Exit programming
	mode

•Press Gto enter the programming mode. The screen displays:

NOTE: If you do not press a key to continue programming within

20 seconds, the telephone automatically exits the programming mode.

•Press -or +repeatedly to move through the list of options.

•Press >to choose the option currently displayed.

•Press Sto store your selections and return to the ‘home screen’ for the feature currently displayed.

Feature

Options

You can set up one feature at a time or you can set up a feature and then move on to set up another feature. After you change one feature, press

+or -to select another feature. When you are finished with features setup, press Eto exit programming mode.

NOTE: After a feature is successfully programmed, the phone beeps once. If the phone beeps twice, repeat the steps to set up the feature.

13

Image 14

AT&T 944 user manual Feature SET UP, Feature Options

Contents

Four-Line Intercom Speakerphone Part 1 Important Product Information Contents Before YOU Begin Glossary Features List Feature Function Setting Options Audible Signals When you hear It means Install one 9V battery InstallationTable/Desk Installation Connect the telephone line cords to the telephone Two Two-Line Jacks Wall Installation Install one 9V battery Connect the power adapter to the telephone Mount the phone on the wall Two Two-Line Jacks Convenience Ports Feature SET UP Feature Options Turn the Ringer On or Off for Each Line Set the Time/DateAssign an Extension Number to Your Phone Turn Line Usage On or Off for Each Line Set Delay RingSelect the Ringer Type Turn Auto-Mute On or Off Assign the Prime Line Line PreferenceAssign the Line Group for this Phone Set the Flash Time Set Audio ModeSet the Dial Mode Turn Hold Reminder On or Off Set Your Phone to be the Centrex Console Phone Program the Centrex Console Delayed Ring TimeErase All Settings and Return the Phone to Default Settings Telephone Operation Handset Telephone OperationMaking or Answering a Call Speakerphone Pause TimerSwitching Modes Do Not Disturb Canceling Call PrivacyCall Privacy Restoring Call Privacy Redial VolumeLine-in-Use Lights Hold Switch Between LinesAuto Redial Speakerphone or Headset Temporary Tone Dialing MuteFlash Conference Calls To talk privately with one party Low Battery IndicatorTransfer a Call To drop one line Speed Dial Operation Making a Speed Dial Call Storing a Number in a Speed Dial LocationReviewing a Speed Dial Entry Intercom Operation Basic Intercom Operations Making an Intercom Call with the Handset Answering an Intercom Call Switching Between an Intercom Call and a Single-phoneMaking an Intercom Call with the Speakerphone or Headset Making a Single-phone Making an Intercom Conference Call Paging All PhonesAnswering a System-wide Room Monitor Using a Fax Switch Adding a FAX Machine Case of Difficulty Intercom Paging Signal Not ReceivedLine Lights Remain On When No Line is Connected Telephone Does Not Ring Display Screen is Blank Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Expanding the Phone System Line Groups Private Lines Enabling the Console Phone Setup ChecklistCentrex Operation Console Operation Picking Up Another Station’s Line Setting Ring Delay DurationAnswering a Delayed Ring Audio Mode 4 Index Reset ALL Advanced American Telephones. All rights reserved