Paging All Phones, Answering a System-wide, Room Monitor | AT&T 944

You cannot put an intercom conference call on hold.

INTERCOM OPERATION

Paging All Phones

1Press pt. The screen displays PAGE ALL.

2Speak toward the telephone or into the headset.

3Press and release Kor hto disconnect.

Answering a System-wide Page

NOTE: Only one extension can answer a system-wide page.

When you receive a system-wide page, your phone beeps and the screen shows the paging extension:

1Press pto answer.

2To end, press and release Kor h.

Making an Intercom Conference Call

1Make or answer a call.

2Press and release Iand enter the extension number of the third party. The line is automatically put on hold.

3After the third party answers, press and release C.

4To end an intercom conference call, hang up.

NOTE:

Room Monitor

You can activate the speaker of another phone to monitor sounds in that room.

1Press and release p.

2Enter the extension number of the telephone to be monitored.

3Press and release Mif you don’t want sounds on your end to be heard.

4To end monitoring, press and release K.

The party at the extension being monitored will hear a beep as with any page, signaling that the speakerphone has been activated.

NOTE: An extension cannot be monitored when Auto-Mute is turned on at that extension.

32

Image 33

AT&T 944 user manual Paging All Phones, Answering a System-wide, Making an Intercom Conference Call, Room Monitor

Contents

Part 1 Important Product Information Four-Line Intercom Speakerphone Contents Before YOU Begin Glossary Feature Function Setting Options Features List When you hear It means Audible Signals Installation Table/Desk InstallationInstall one 9V battery Two Two-Line Jacks Connect the telephone line cords to the telephone Wall Installation Install one 9V battery Mount the phone on the wall Connect the power adapter to the telephone Two Two-Line Jacks Convenience Ports Feature Options Feature SET UP Set the Time/Date Assign an Extension Number to Your PhoneTurn the Ringer On or Off for Each Line Set Delay Ring Select the Ringer TypeTurn Line Usage On or Off for Each Line Assign the Prime Line Line Preference Assign the Line Group for this PhoneTurn Auto-Mute On or Off Set the Dial Mode Set Audio ModeSet the Flash Time Turn Hold Reminder On or Off Program the Centrex Console Delayed Ring Time Erase All Settings and Return the Phone to Default SettingsSet Your Phone to be the Centrex Console Phone Telephone Operation Making or Answering a Call Telephone OperationHandset Speakerphone Timer Switching ModesPause Call Privacy Canceling Call PrivacyDo Not Disturb Restoring Call Privacy Volume Line-in-Use LightsRedial Auto Redial Switch Between LinesHold Speakerphone or Headset Flash MuteTemporary Tone Dialing Conference Calls Transfer a Call Low Battery IndicatorTo talk privately with one party To drop one line Speed Dial Operation Storing a Number in a Speed Dial Location Reviewing a Speed Dial EntryMaking a Speed Dial Call Intercom Operation Making an Intercom Call with the Handset Basic Intercom Operations Making an Intercom Call with the Speakerphone or Headset Switching Between an Intercom Call and a Single-phoneAnswering an Intercom Call Making a Single-phone Answering a System-wide Paging All PhonesMaking an Intercom Conference Call Room Monitor Adding a FAX Machine Using a Fax Switch Line Lights Remain On When No Line is Connected Intercom Paging Signal Not ReceivedCase of Difficulty Telephone Does Not Ring Tone Signals Do Not Activate a Remote Device Operation During a Power FailureDisplay Screen is Blank Line Groups Expanding the Phone System Private Lines Centrex Operation Setup ChecklistEnabling the Console Phone Console Operation Setting Ring Delay Duration Answering a Delayed RingPicking Up Another Station’s Line Index Audio Mode 4 Reset ALL Advanced American Telephones. All rights reserved