AT&T 944 user manual Auto Redial, Hold, Switch Between Lines, Speakerphone or Headset

TELEPHONE OPERATION

Speakerphone or Headset

To dial the same number again, press a. The phone automatically selects an available line and dials the last number.

NOTE: You will experience a delay before the call is dialed when using the Redial feature. This is normal.

Auto Redial

Press atwice and the phone automatically selects an available line

— OR —

Press a LINE button to select a line, then press atwice.

The phone redials the number you just called, and continues up to 10 times until the other line rings, or until you cancel Auto Redial.

When you hear the line ringing or the other party answers, lift the handset or press Kor hto complete the call and speak with the other party. If you don’t complete the call, the phone disconnects after 30 seconds.

To cancel Auto Redial, press any button (except Volume +or -).

Hold

Press and release H. The light of the line on hold flashes, and a double-beep sounds every 30 seconds to remind you the call is on hold. (To turn off the reminder beep, see “Turn Hold Reminder On or Off” in FEATURE SET UP). You can replace the handset in the cradle without disconnecting the call. The speakerphone is automatically turned off.

To release Hold, press and release the LINE button of the call on hold.

NOTE: The phone automatically disconnects a call on hold after 20 minutes. To keep a call on hold longer than 20 minutes, release Hold before 20 minutes and then place the call on hold again.

NOTE: You cannot put an intercom call on hold.

NOTE: If a line is in use, pressing Ior pwill place the line on hold and activate the intercom.

Switch Between Lines

1Press and release Hto keep a call on the first line.

2Press and release the LINE button of another line to make or answer another call.

NOTE: If you switch lines without pressing Hfirst, you will drop the call.

24